Cavities over 150mm

The Ancon ST1 is suitable for cavities from 50mm to 225mm and can be used for all types of building of any height, anywhere in the British Isles. The section that spans the cavity has a series of holes to provide water drips. This allows the same tie to be used in insulated cavities as well as open cavities.

PLEASE BE ADVISED THAT THIS PRODUCT IS BEING WITHDRAWN FROM SALE AND REPLACED WITH THE BF2 WALL TIE. Please get in touch for more info

The Ancon Teplo-BF is a composite wall tie manufactured fromÊpultruded basalt fibres. It has a thermal conductivity of 0.7W/mK.

The Ancon Teplo-BF is a composite wall tie manufactured fromÊpultruded basalt fibres. It has a thermal conductivity of 0.7W/mK.

The Teplo-BFR is a low thermal conductivity wall tie manufactured from basalt-fibres that features a plain end for resin anchoring into an existing structure and a moulded safety end for building into a new bed joint.

Cavities exceeding 150mm require ties in a length that can be difficult to balance and keep horizontal during installation. An Ancon Two-Part Tie has one section that is built into the inner leaf and a second, interlocking section that is fixed as the outer leaf is constructed. An embedment of 75mm is required at each end.